.
XG-5000K
  

Centered around a 5 Million Gate Spartan 3 FPGA, the XG-5000K is the ultimate PC/104 Plus FPGA board that is ready to meet the most demanding of system designs. The board features a 5 Million Gate Spartan 3 FPGA, 256MByte of on-board Micron SRAM, 32MByte of on-board Intel FLASH, 264 user programmable I/O, Type 1 Compact Flash connector, a secondary 500K Gate Spartan IIIe FPGA, 10/100T Ethernet interface, two RS232 interfaces, PC/104 connector, PC/104 Plus connector, 0-25MHz programmable DDS master clock source, 8MByte of secondary DataFlash and a 25MHz initial master clock

The XG-5000K has the advanced feature of allowing the user to remotely reconfigure the entire board through the on-board JTAG connector, PC/104 connector, PC/104 Plus connector, 10/100T Ethernet interface or any external interface connected to the XG-5000K. The XG-5000K has also has been developed with Xilinx's advanced design revisioning technology. This allow the XG-5000K to retain on board as many as 16 partial or up to 4 complete design revisions for the 5 Million Gate Spartan 3 FPGA. Any one of these design revisions can be remotely programmed into the 5 Million Gate Spartan 3 FPGA or the XG-5000K can be programmed to reconfigure itself based upon external events.

The XG-5000K also incorporates a secondary 500,000 gate Spartan IIIe FPGA. This second FPGA is initially configured to control remote reprogramming and control of the design revisioning features of the XG-5000K. But the secondary Spartan IIIe FPGA can be reconfigured by the user to meet the requirements of a particular system design.

The XG-5000K can be powered from the PC/104 bus or can be powered from an single 5VDC external source allowing the board to be utilized as a stacked module in PC/104 applications or as a standalone product design platform. This allows the board to be ideal in embedded PC/104 applications or to be utilized in development platforms, design prototypes or production products.

Available in Industrial Temperature range.

Features:
Xilinx Spartan III 5 Million Gate FPGA
256 MByte of RAM

32 MByte of Flash
8MByte of Data Flash  
264 User configurable I/O  
Secondary Xilinx Spartan III 500,000 Gate FPGA  
PC/104 Interface (ISA connector)  
PC/104 Plus Interface (PCI connector)  
10/100 Ethernet  
Compact Flash Type 1 connector  
25 Mhz Master Clock  
Secondary 0 - 25Mhz User Programmable DDS Clock  
2 - RS232 Interfaces  
Incorporates Xilinx's design revisioning capabilities allowing the XG-5000K to retain on board as many as 16 partial or up to 4 complete design revisions for the 5 Million Gate Spartan 3 FPGA  
Can be powered through a PC/104 stack or by an external DC supply.  
Can be remotely reprogrammed through any of the bus and I/O connectors/pins.  
JTAG interface.  
Available only in industrial temperature  
   
 

For more information and pricing contact Jacyl at

sales@jacyl.com

or

1-800-590-6067